Single Point Incremental Forming of Polymers – a review of process parameters (CROSBI ID 651719)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Borić, Andrej ; Pepelnjak, Tomaž ; Jurkovic, Zoran
engleski
Single Point Incremental Forming of Polymers – a review of process parameters
In this paper, is given a systematic quantitative review of Single Point Incremental Forming (SPIF) process parameters that affect the formability of the polymer sheets during forming process. The obtained results from several relevant papers are collected and compared, such as a tool diameter, material thickness, step down, feed rate, spindle speed and their interactions were analysed. Only the most basic process parameters are selected because it has been shown that those ones are necessary for every SPIF process. This analysis contains data of an ideal operating range for each process parameter for seven different polymers. In the study, it has been shown that main parameters of SPIF process of polymers are not independent.
Single Point Incremental Forming ; Polymers ; Formability ; Process parameters
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
255-258.
2017.
objavljeno
Podaci o matičnoj publikaciji
International Conference on Innovative Technologies, IN-TECH 2017
Pepelnjak, T. ; Car, Z. ; Kudláček, J.
Jaromer: Tehnički fakultet Sveučilišta u Rijeci
0184-9069
Podaci o skupu
International Conference on Innovative Technologies IN-TECH 2017
predavanje
11.09.2017-13.09.2017
Ljubljana, Slovenija