Computer process planning of induction hardening (CROSBI ID 484752)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Cajner, Franjo ; Petrič, Branko ; Landek, Darko
engleski
Computer process planning of induction hardening
Phases in setting up the induction hardening procedure have been discussed. For the exact definition of working parameters, computer simulation is recommended. For the axially symmetric work-pieces a special simulation program has been developed. Performance of the simulation program has been tested for the case of induction hardening of steel cylindrical work-piece. The measured values of surface hardness and hardening depths have been compared with the specified values, indicating good corespondence between the simulated and obtained values
Induction Hardening; Process Planning; Process Simulation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
415 - 422-x.
2001.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 8th Seminar International Federation for Heat Treatment and Surface Engineering
Liščić, Božidar
Zagreb: IFHTSE & HDTOIP
Podaci o skupu
8th Seminar IFHTSE 2001: Integration of heat treatment and surface engineering in the manufacture of engineering components
poster
12.09.2001-14.09.2001
Cavtat, Hrvatska; Dubrovnik, Hrvatska