Napredna pretraga

Pregled bibliografske jedinice broj: 882465

WELDING OF RAILS


Samardžić, Ivan; Dunđer, Marko; Stoić, Antun; Starčević, Valnea; Marić, Dejan; Duspara, Miroslav
WELDING OF RAILS // CIM 2017 Computer integrated manufacturing and high speed machining / Abele, Eberhard ; Duiljak, Toma ; Ciglar, Damir (ur.).
Zadar: Croatian Association of Production Engineering, 2017. str. 217-222 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)


Naslov
WELDING OF RAILS

Autori
Samardžić, Ivan ; Dunđer, Marko ; Stoić, Antun ; Starčević, Valnea ; Marić, Dejan ; Duspara, Miroslav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni

Izvornik
CIM 2017 Computer integrated manufacturing and high speed machining / Abele, Eberhard ; Duiljak, Toma ; Ciglar, Damir - Zadar : Croatian Association of Production Engineering, 2017, 217-222

Skup
16th INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING

Mjesto i datum
Zagreb, Hrvatska, 10-08.06.2017

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Welding process, rails, flash welding, thermite welding, CGEAW welding procedure

Sažetak
The paper presents processes used for rail welding that has been most commonly used. Welded joint represent weak spot on welded products, which is also case with rails too. Rails are jointed mostly with thermite or flash butt welding process or with some other welding process. Repair welding is used frequently in maintaining of rails, but from stand point of reliability, it can be very dangerous if inappropriate welding technology is applied. Manual metal arc welding with coated electrode is usually applied for repair welding.

Izvorni jezik
Engleski