Accuracy of Polyjet 3D printed Structures (CROSBI ID 649109)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Pilipović, Ana ; Baršić, Gorana ; Katić, Marko
engleski
Accuracy of Polyjet 3D printed Structures
Additive manufacturing (AM) is increasingly applied in the development projects from the initial idea to the finished product. The reasons are various, but what should be emphasised is the possibility of rapid manufacturing of the products of complex geometry based on the 3D computer model. Today there are a lot of different technologies in additive manufacturing. This paper reviews PolyJet technology which was first introduced in 2000. From that time till know, it was found that reproducibility of dimensional features represents a problem for all AM processes. Accuracy is difficult to predict, since it depends on many parameters (material type, surface finish types (matte vs. glossy), part orientation, feature direction and feature shape). In this paper a test plate with different geometrical features is presented in order to understand what the minimum manufacturable feature size is, as well as to make conclusions about problems in assuring reproducibility of structures printed using PolyJet technology. Measurements of different geometrical features on two test plates processed with same production parameters are presented and discussed.
Dimensional accuracy, PolyJet technology, reproducibility
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
207-212.
2017.
objavljeno
Podaci o matičnoj publikaciji
CIM 2017 Computer Integrated Manufacturing and High Speed Machining
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
2584-3214
Podaci o skupu
16th INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING –CIM2017
predavanje
08.06.2017-10.06.2017
Zadar, Hrvatska