Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

An Investigation of the Composition of the Flow in and out of a Two-stroke Diesel engine and Air Consumption Ratio (CROSBI ID 239950)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Grljušić, Mirko ; Tolj, Ivan ; Radica, Gojmir An Investigation of the Composition of the Flow in and out of a Two-stroke Diesel engine and Air Consumption Ratio // Energies (Basel), 10 (2017), 6; 805-1-805-19. doi: 10.3390/en10060805

Podaci o odgovornosti

Grljušić, Mirko ; Tolj, Ivan ; Radica, Gojmir

engleski

An Investigation of the Composition of the Flow in and out of a Two-stroke Diesel engine and Air Consumption Ratio

The aim of this research was to investigate the mass, substances and energy flow through two- stroke low speed Diesel engines. For this reason, a zero-dimensional model of the combustion in the engine was developed with a calculated amount and composition of exhaust gases. Due to the large amount of oxygen in the exhaust gases, a ratio of real air consumption and stoichiometric amount of air required for combustion of injected fuel was set. The calculated ratio showed that the engine consumes four times more air than needed for combustion in AFRstoich. In this work it is called the Air Consumption Factor or Ratio and has not been mentioned in scientific literature before. Air Consumption Ratio is defined as a factor of dry or humid air. To be more comprehensive, a modified diagram of composition of the flow in and out of a two- stroke fuel injection engine and the cylinder was drawn.

two-stroke engine ; uniflow scavenging ; exhaust gas composition ; two-stroke gas flow performance parameters ; air-fuel ratio ; air consumption factor/ratio

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

10 (6)

2017.

805-1-805-19

objavljeno

1996-1073

10.3390/en10060805

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost