Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Multi-Camera System Calibration for 3D Surround Camera Distribution (CROSBI ID 647979)

Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | domaća recenzija

Mijatov, Jovan ; Zlokolica, Vladimir ; Ljubobratović, Relja ; Vdovjak, Krešimir ; Galić, Irena ; Obradović, Ratko V. Mastilović Multi-Camera System Calibration for 3D Surround Camera Distribution // Fifth Croatian Computer Vision Workshop - Abstract Book / Lončarić, Sven ; Cupec, Robert (ur.). Osijek: University of Zagreb, Croatia ; Josip Juraj Strossmayer University of Osijek, Croatia, 2016. str. 18-18

Podaci o odgovornosti

Mijatov, Jovan ; Zlokolica, Vladimir ; Ljubobratović, Relja ; Vdovjak, Krešimir ; Galić, Irena ; Obradović, Ratko V. Mastilović

engleski

Multi-Camera System Calibration for 3D Surround Camera Distribution

Multi-camera system with 3D surround camera configuration is currently most common setup used for high precision 3D reconstruction and modeling in computer graphics applications. Within this camera setup the most important features are exact camera positioning and camera characteristics which must be optimally tuned for 3D object, i.e., scene that is being reconstructed. One of the most important steps in 3D reconstruction is multi-camera calibration, which should be optimized for target application ; 3D calibration object and methodology is to be appropriately designed. In this paper we present new approach for multi-camera system calibration for 3D surround camera configuration, aimed at 3D reconstruction and 3D modeling. The proposed calibration approach estimates intrinsic parameters and lens distortions of each camera as well as extrinsic parameters that define relative 3D positioning of the cameras within the multi-camera system. The proposed 3D object used for calibration is specifically designed 3D cube, which is first designed and tested in virtual environment to meet all constraints set by target application ; our application is 3D face reconstruction and modeling. The 3D calibration cube is formed of different patterns which can be viewed by more than one camera at a time allowing thus proposed sequential stereo calibration approach. The proposed calibration approach is evaluated by comparing estimated multi-camera system parameters with two state of the art calibration approaches and based on quality of the dense 3D point cloud generation.

kalibracija kamere ; 3D rekonstrukcija ; gusti oblak točaka

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

18-18.

2016.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Fifth Croatian Computer Vision Workshop - Abstract Book

Lončarić, Sven ; Cupec, Robert

Osijek: University of Zagreb, Croatia ; Josip Juraj Strossmayer University of Osijek, Croatia

Podaci o skupu

5th Croatian Computer Vision Workshop (CCVW 2016)

poster

11.10.2016-11.10.2016

Osijek, Hrvatska

Povezanost rada

Računarstvo

Poveznice