Napredna pretraga

Pregled bibliografske jedinice broj: 874601

Remineralizing amorphous calcium phosphate based composite resins : The influence of inert fillers on monomer conversion, polymerization shrinkage, and microhardness


Marović, Danijela; Šariri, Kristina; Demoli, Nazif; Ristić, Mira; Hiller, Karl-Anton; Škrtić, Drago; Rosentritt, Martin; Schmalz, Gottfried; Tarle, Zrinka
Remineralizing amorphous calcium phosphate based composite resins : The influence of inert fillers on monomer conversion, polymerization shrinkage, and microhardness // Croatian medical journal, 57 (2016), 5; 465-473 doi:10.3325/cmj.2016.57.465 (međunarodna recenzija, članak, znanstveni)


Naslov
Remineralizing amorphous calcium phosphate based composite resins : The influence of inert fillers on monomer conversion, polymerization shrinkage, and microhardness

Autori
Marović, Danijela ; Šariri, Kristina ; Demoli, Nazif ; Ristić, Mira ; Hiller, Karl-Anton ; Škrtić, Drago ; Rosentritt, Martin ; Schmalz, Gottfried ; Tarle, Zrinka

Izvornik
Croatian medical journal (0353-9504) 57 (2016), 5; 465-473

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Amorphous calcium phosphate ; composite resins ; polymerization shrinkage ; monomer conversion ; microhardness

Sažetak
The addition of inert fillers to a bioactive dental restorative composite material affects its degree of conversion (DC), polymerization shrinkage (PS), and microhardness (HV). Methods Three amorphous calcium phosphate (ACP)-based composite resins: without added fillers (0-ACP), with 10% of barium-glass fillers (Ba-ACP), and with 10% of silica fillers (Si-ACP), as well as commercial control (Ceram•X, Dentsply DeTrey) were tested in laboratory conditions. The amount of ACP (40%) and the composition of the resin mixture (based on ethoxylated bisphenol A dimethacrylate) was the same for all ACP materials. Fourier transform infrared spectroscopy was used to determine the DC (n = 40), 20 min and 72 h after polymerization. Linear PS and Vickers microhardness (n = 40) were also evaluated. The results were analyzed by paired samples t test, ANOVA, and one-way repeated measures ANOVA with Student-Newman-Keuls or Tukey’s post-hoc test (P = 0.05). Results The addition of barium fillers significantly increased the DC (20 min) (75.84 ± 0.62%) in comparison to 0-ACP (73.92 ± 3.08%), but the addition of silica fillers lowered the DC (71.00 ± 0.57%). Ceram•X had the lowest DC (54.93 ± 1.00%) and linear PS (1.01 ± 0.24%) but the highest HV (20.73 ± 2.09). PS was significantly reduced (P < 0.010) in both Ba-ACP (1.13 ± 0.25%) and Si-ACP (1.17 ± 0.19%) compared to 0-ACP (1.43 ± 0.21%). HV was significantly higher in Si-ACP (12.82 ± 1.30) than in 0-ACP (10.54 ± 0.86) and Ba-ACP (10.75 ± 0.62) (P < 0.010). Conclusion Incorporation of inert fillers to bioactive remineralizing composites enhanced their physical-mechanical performance in laboratory conditions. Both added fillers reduced the PS while maintaining high levels of the DC. Silica fillers additionally moderately improved the HV of ACP composites.

Izvorni jezik
Engleski

Znanstvena područja
Kemija



POVEZANOST RADA


Ustanove
Institut za fiziku, Zagreb,
Stomatološki fakultet, Zagreb,
Institut "Ruđer Bošković", Zagreb

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus
  • MEDLINE


Citati