Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Polypropylene Blends with m-EPR Copolymers. Structure, Morphology and Thermal Properties (CROSBI ID 238678)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Pustak, Anđela ; Švab, Iztok ; Govorčin Bajsić, Emi ; Denac, Matjaž ; Musil, Vojko ; Šmit, Ivan Polypropylene Blends with m-EPR Copolymers. Structure, Morphology and Thermal Properties // Polymer-plastics technology and engineering, 57 (2018), 3; 229-241. doi: 10.1080/03602559.2017.1320720

Podaci o odgovornosti

Pustak, Anđela ; Švab, Iztok ; Govorčin Bajsić, Emi ; Denac, Matjaž ; Musil, Vojko ; Šmit, Ivan

engleski

Polypropylene Blends with m-EPR Copolymers. Structure, Morphology and Thermal Properties

The effects of different contents of two metallocene propylene-based m-EPR elastomers on structure, morphology, thermal and dynamic mechanical properties of the isotactic polypropylene/m-EPR blends were investigated. The both m-EPR copolymers have been built in iPP matrix as amorphous phase. However, the nucleation effect at lowest addition (2.5 vol%) and the solidification effect along with increased m-EPR's additions have caused changes of the crystallinity degree and the size of spherulites in the iPP matrix. Higher degree of miscibility/compatibility of the iPP/m-EPR2, with lower viscosity has been observed. Homogeneous dispersion of m-EPR particles as well as their radial distribution has been observed.

composites, morphology, interfacies, structure-property relationships

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

57 (3)

2018.

229-241

objavljeno

0360-2559

1525-6111

10.1080/03602559.2017.1320720

Povezanost rada

Kemija, Kemijsko inženjerstvo

Poveznice
Indeksiranost