Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 85573

Practical Model for On-Line Prediction of the Tool's Flank Wear


Cukor, Goran
Practical Model for On-Line Prediction of the Tool's Flank Wear // 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002 / Brdarević, Safet et. al. (ur.).
Zenica: Faculty of Mechanical Engineering in Zenica, 2002. str. 87-90 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 85573 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Practical Model for On-Line Prediction of the Tool's Flank Wear

Autori
Cukor, Goran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002 / Brdarević, Safet et. al. - Zenica : Faculty of Mechanical Engineering in Zenica, 2002, 87-90

Skup
6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002

Mjesto i datum
Neum, Bosna i Hercegovina, 18-22.09.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
flank wear; cutting force; modelling

Sažetak
The paper presents a reliable model for on-line prediction of the tool's flank wear feasible for practical implementation on a CNC lathe. Prediction of the progress of flank wear land has been achieved by using the cutting force-sensor signals. A flank wear-time model has been established from an estimation of adhesive wear volume. The efficiency and reliability of the developed model have been verified on reported turning tests performed under various cutting conditions but for the same workpiece material. Predictions from the model have been well correlated with the actual flank wear measurements.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Cukor (autor)

Citiraj ovu publikaciju

Cukor, Goran
Practical Model for On-Line Prediction of the Tool's Flank Wear // 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002 / Brdarević, Safet et. al. (ur.).
Zenica: Faculty of Mechanical Engineering in Zenica, 2002. str. 87-90 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Cukor, G. (2002) Practical Model for On-Line Prediction of the Tool's Flank Wear. U: Brdarević, S. (ur.)6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002.
@article{article, author = {Cukor, G.}, editor = {Brdarevi\'{c}, S.}, year = {2002}, pages = {87-90}, keywords = {flank wear, cutting force, modelling}, title = {Practical Model for On-Line Prediction of the Tool and \#39;s Flank Wear}, keyword = {flank wear, cutting force, modelling}, publisher = {Faculty of Mechanical Engineering in Zenica}, publisherplace = {Neum, Bosna i Hercegovina} }




Contrast
Increase Font
Decrease Font
Dyslexic Font