Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 85509

Cutting Forces and Adhesive Flank Wear Model


Cukor, Goran
Cutting Forces and Adhesive Flank Wear Model // Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02 / Katalinic, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International & Mech. Eng. Faculty in Slavonski Brod, 2002. str. 161-166 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 85509 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Cutting Forces and Adhesive Flank Wear Model

Autori
Cukor, Goran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02 / Katalinic, Branko ; Kljajin, Milan - Slavonski Brod : DAAAM International & Mech. Eng. Faculty in Slavonski Brod, 2002, 161-166

Skup
1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02

Mjesto i datum
Slavonski Brod, Hrvatska, 12-14.09.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Turning; Flank wear model; Tool-condition monitoring

Sažetak
The single most significant type of turning tool wear that has drawn constant attention is flank wear. In order to predict the progress of flank wear land in this study, adhesive wear has been considered as the predominant one at low machining temperatures. An adhesive flank wear-time model was derived for possible use for in-process tool-condition monitoring through measurements of the variations in cutting force components in xy-plane. Predictions from the model correlate well with the actual flank wear measurements.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Cukor (autor)

Citiraj ovu publikaciju

Cukor, Goran
Cutting Forces and Adhesive Flank Wear Model // Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02 / Katalinic, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International & Mech. Eng. Faculty in Slavonski Brod, 2002. str. 161-166 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Cukor, G. (2002) Cutting Forces and Adhesive Flank Wear Model. U: Katalinic, B. & Kljajin, M. (ur.)Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02.
@article{article, author = {Cukor, G.}, year = {2002}, pages = {161-166}, keywords = {Turning, Flank wear model, Tool-condition monitoring}, title = {Cutting Forces and Adhesive Flank Wear Model}, keyword = {Turning, Flank wear model, Tool-condition monitoring}, publisher = {DAAAM International and \#38; Mech. Eng. Faculty in Slavonski Brod}, publisherplace = {Slavonski Brod, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font