Kerf Variation Analysing After Cutting With Abrasive Water Jet of a Steel Part (CROSBI ID 640697)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Basarman, A.P. ; Damjanovic, D. ; , Kozak, D. ; Lobonțiu, M. ; Medan, N.
engleski
Kerf Variation Analysing After Cutting With Abrasive Water Jet of a Steel Part
The method of cutting materials using water jet is a method that is in full ascension regarding the level of usability in production. In order to have the adequate setup for water jet cutting on a certain system, the surface quality, the kerf aspect, the shape and respectively the form of the obtained part have to be researched and analyzed.This paper presents the results obtained after cutting one square shaped part, made of 1C45 material. In the study was analised both the inside and the outside of the cut, the kerf width, the aspect of the taper and the profile deviation.
Abrasive Water Jet; Surface Quality; Surface Aspect; Kerf; Taper
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
211-217.
2016.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 8th International Scientific and Expert Conference TEAM 2016
Maronek, Milan ; Barta Jozef
Trnava: Alumni Press
978-80-8096-237-1
Podaci o skupu
8th International Scientific and Expert Conference TEAM 2016
predavanje
19.10.2016-21.10.2016
Slovačka