Analysis of the influence of 3D printing on hardness of parts (CROSBI ID 232363)
Prilog u časopisu | izvorni znanstveni rad
Podaci o odgovornosti
Pavlic, Tomislav ; Čikić, Ante ; Golubić, Stjepan
engleski
Analysis of the influence of 3D printing on hardness of parts
The principles of additive production are such that they enable the making of very complex product geometry. The hardness of printed parts is not increased proportionally to the increase of the infill of the parts themselves. Different ways of printing have a bigger impact on the hardness than the infill. The research conducted on the "solid" model samples established sufficient hardness of parts gained from 3D printing with less material use and shorter time of production due to correct selection of parameters and the way of printing
3D print ; ABS ; deflection ; infill
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
23 (3)
2016.
843-847
objavljeno
1330-3651
1848-6339
Povezanost rada
nije evidentirano