Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Testing of Physical Properties of Spun Yarns after Atmospheric Argon Plasma Treatment (CROSBI ID 640516)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Ercegović Ražić, Sanja ; Bišćan, Marijan ; Milošević, Slobodan ; Popović, Dean ; Jurković, Tina Testing of Physical Properties of Spun Yarns after Atmospheric Argon Plasma Treatment // Book of proceedings (International textile clothing & design conference) / Hursa Šajatović A.& Vujasinović E. (ur.). 2016. str. 275-280

Podaci o odgovornosti

Ercegović Ražić, Sanja ; Bišćan, Marijan ; Milošević, Slobodan ; Popović, Dean ; Jurković, Tina

engleski

Testing of Physical Properties of Spun Yarns after Atmospheric Argon Plasma Treatment

In order to carried out the targeted modification of properties and achieve the desired effects by plasma treatment, it is necessary to determine and optimize the processing parameters such as the type of gas, gas flow rate, operating frequency, current, voltage, treatment time and distance between the electrodes and the substrate surface. In this paper the plasma device designed for treatment of spun yarns from lyocell fibers is applied, by varying the velocity i.e. time of the passage of yarn through the glass coil inside of which is created an argon plasma for uniform yarn treatment at atmospheric pressure. The effect of the plasma is determined by testing the physical properties - unevenness and hairiness, and part of the mechanical properties - breaking force and elongation. Results indicate that argon plasma acting to modification of physical properties of tested yarns but for optimizing of the process parameters it is necessary to carry out more treatments under various conditions. According to obtained results of tested physical properties, the changes are mainly reflected in the reduction of yarn hairiness and unevenness. Argon plasma at different time and velocity does not significantly affect on the distortion of the mechanical properties expressed through breaking force and elongation, and tensile strength of tested yarns.

atmospheric plasma ; argon ; lyocell spun yarns ; physical properties ; mechanical properties

This paper was financed from scientific support titled Optimization of properties for composite material reinforcements using sol-gel and plasma (coordinator: Assoc. Prof. A. Tomljenović) funded by University of Zagreb.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

275-280.

2016.

objavljeno

Podaci o matičnoj publikaciji

Book of Proceedings of 8th International Textile, Clothing & Design Conference

Hursa Šajatović A.& Vujasinović E.

Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu

1847-7275

Podaci o skupu

8th International Textile Clothing & Design Conference - Magic World of Textiles

poster

02.10.2016-05.10.2016

Dubrovnik, Hrvatska

Povezanost rada

Fizika, Tekstilna tehnologija