Research on morphology of boride layers obtained on C45 steel (CROSBI ID 639701)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Milinović, Andrijana ; Kladarić, Slavica ; Kladarić, Ivica
engleski
Research on morphology of boride layers obtained on C45 steel
This study focuses on morphology of borides formed on C45 steel. Pack boronizing is carried out at a temperature range of 870 – 970 °C in durations of 4 to 8 h. Through use of linear method, average thicknesses of boride layers as well as volume share of boride phase concerning cross section of the layer are determined. Taking the morphology into account, there are two main parts of boride layer: compact part and toothed part. In this study, boride layer is divided in compact part and toothed part based on volume share, and in continuation, the influence of boronizing temperature and duration on boride morphology is analysed. Analysis showed existence of influence of mentioned factors not only on boride layer thickness, but also on its morphology.
Boronizing ; Boride layer ; Morphology ; Carbon steel
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1-8.
2016.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 3th Mediterranean Conference on Heat Treatment and Surface Engineering
Leskovšek, Vojteh ... et al.
Ljubljana: Slovenian Society for Heat Treatment : Institute of Metals and Technology
978-961-92518-9-8
Podaci o skupu
MCHT&SE 2016 - 3rd Mediterranean Conference on Heat Treatment and Surface Engineering
predavanje
26.09.2016-28.09.2016
Portorož, Slovenija