A Numerical Model for Estimation of Spur Gear Tooth Bending Fatigue Life (CROSBI ID 638596)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vučković, Krešimir ; Galić, Ivica ; Čular, Ivan
engleski
A Numerical Model for Estimation of Spur Gear Tooth Bending Fatigue Life
A numerical model, based on the finite element and the strain-life methods, is proposed to estimate tooth bending fatigue life of case- carburized steel spur gear from number of cycles required to initiate surface fatigue crack at the tooth root fillet. The fatigue life estimates were found to correlate very well with the available experimental lives from pulsator testing. The model is used then to correlate fatigue life estimates for two load cases: the first one in which the gear tooth is loaded with pulsating load acting at the outer point of single pair tooth contact, and the second one in which quasi-static meshing of the gears is considered.
Spur gears ; Tooth bending fatigue ; Finite element method ; Crack initiation ; Residual stress
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
-
2016.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 16th International Conference on New Trends in Fatigue and Fracture (NT2F16)
Željko Božić, Milan Vrdoljak
Zagreb:
978-953-7738-40-2
Podaci o skupu
NT2F16 16th International Conference on New Trends in Fatigue and Fracture
predavanje
24.05.2016-27.05.2016
Dubrovnik, Hrvatska