Napredna pretraga

Pregled bibliografske jedinice broj: 823024

Proposal of new Pipe-Ring specimen for fracture mechanics

Damjanović, Darko; Kozak, Dražan; Gubeljak, Nenad; Tropša, Vlado
Proposal of new Pipe-Ring specimen for fracture mechanics // International Conference on Manufacturing Engineering and Materials, ICMEM 2016
Nový Smokovec, Slovačka, 2016. (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Proposal of new Pipe-Ring specimen for fracture mechanics

Damjanović, Darko ; Kozak, Dražan ; Gubeljak, Nenad ; Tropša, Vlado

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

International Conference on Manufacturing Engineering and Materials, ICMEM 2016

Mjesto i datum
Nový Smokovec, Slovačka, 06-10.06.2016

Vrsta sudjelovanja

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Residual stress; pipe; hoop stress; incremental hole drilling method; splitting method; tensile test; F - CMOD; PRS; PRNB; SENB

Thin - walled pipes are not suitable for measuring fracture toughness parameters which are of vital importance in pipes because the crack failure is the most common in pipes. They are not suitable because it is impossible to make standard specimens for measuring the fracture toughness like SENB or CT specimens from the thin wall of the pipe. Lot of researches noticed this problem, but only few are found the good and cheap alternative solution for measuring the fracture toughness. Gubeljak and Matvienko proposed so - called Pipe - Ring specimen (PRS) or Pipe - Ring Notched Bend specimen (PRNB) as alternative solution to the SENB specimen. Until now, only the idealized geometry of PRS specimen is analysed, so specimen which is not cut out from the real pipe but made from plate. On this way, the residual stresses are neglected. The aim of this work is to estimate the hoop residual stresses in the real pipes used in boiler industry, produced by hot - rolling technique, so seamless pipes. These kinds of pipes are delivered only normalized, but not stress relieved too. Therefore, there are surly residual stresses present in pipes which are result of manufacturing technique, but also of uneven cooling after the production process. Within this work, hoop stress as the most relevant for pipes is estimated by two methods: incremental hole drilling method and splitting method. Although residual stresses are cause of collapse of many constructions, still in most cases of analysis and design of individual parts, structures and plants residual stresses are not taken into consideration. Residual stresses surly have some effect on the fatigue behaviour of materials as well as on the fracture toughness of material, therefore it is recommended to take them into account while calculating the lifetime of component or structure.

Izvorni jezik

Znanstvena područja

1) Rad je prezentirao prof. dr. sc. Dražan Kozak u obliku pozvanog predavanja. 2) Rad je u ovom obliku nominiran za objavu u časopisu Procedia Engineering


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )

Strojarski fakultet, Slavonski Brod