Napredna pretraga

Pregled bibliografske jedinice broj: 823020

Comparison of fracture behaviour of standard SENB and nonstandard PRNB specimens


Damjanović, Darko; Kozak, Dražan; Gubeljak, Nenad; Predan, Jožef; Štefane, Primož; Hloch, Sergej
Comparison of fracture behaviour of standard SENB and nonstandard PRNB specimens // NT2F16 - 16th International Conference on New Trends in Fatigue and Fracture, Book of Abstracts / Božić, Željko (ur.).
Zagreb: Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, 2016. str. 215-216 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Comparison of fracture behaviour of standard SENB and nonstandard PRNB specimens

Autori
Damjanović, Darko ; Kozak, Dražan ; Gubeljak, Nenad ; Predan, Jožef ; Štefane, Primož ; Hloch, Sergej

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
NT2F16 - 16th International Conference on New Trends in Fatigue and Fracture, Book of Abstracts / Božić, Željko - Zagreb : Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, 2016, 215-216

ISBN
978-953-7738-39-6

Skup
16th International Conference on New Trends in Fatigue and Fracture (NT2F16)

Mjesto i datum
Dubrovnik, Hrvatska, 24-27.05.2016

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Fracture behavior; Fracture toughness; Single edge notched bend specimen; SENB; Pipe - ring notched bend specimen; PRNB; CTOD-R; CTOD-Lr

Sažetak
It is well known that the pipes or tubes due to its geometry are not suitable for making the standard specimens for fracture toughness testing (e. g. Single Edge Notched Bend specimen (SENB) or Compact Tension specimen (CT)). This is especially expressed in thin walled pipes or tubes. So the new type of specimen is proposed and it is called Pipe ring notched bend specimen (PRNB), which is ideal for pipes or tubes due to geometry of the specimen which is the ring. The authors [1], [2], [3], [4] have made a lot of researches on this type of specimen but cut out from the plate, not from the real pipe where are present some imperfections in the geometry, material, etc.. Within this paper, PRNB specimen is cut out from the real pipe which is used in the boilers and made from material 16Mo3. From the same pipe, two SENB specimens are made too in order to make comparison in fracture behavior of SENB and PRNB specimens.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

Napomena
U tiskanom obliku rad objavljen u obliku proširenog sažetka, dok u digitalnom obliku kao cjeloviti rad.



POVEZANOST RADA


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )

Ustanove
Strojarski fakultet, Slavonski Brod