EFFECT OF TIG WELDING WITH AND WITHOUT ACTIVE FLUX ON THE PROPERTIES OF AISI 304 WELDED JOINTS (CROSBI ID 636367)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Klobčar, Damjan ; Tušek, Janez ; Bizjak, Milan ; Bušić, Matija
engleski
EFFECT OF TIG WELDING WITH AND WITHOUT ACTIVE FLUX ON THE PROPERTIES OF AISI 304 WELDED JOINTS
The paper presents the effects of tungsten inert gas (TIG) welding of 4 and 10 mm thick austenitic stainless steel EN X5CrNi1810 (AISI 304) in the butt joint with and without active flux. The sample dimensions were 30050 mm. The commercially available active flux QuickTIGTM, which does not contain health hazardous ingredients, was used for testing. In the planned study the influence of welding position and weld groove shape was analysed based on the penetration depth. A comparison of microstructure formation, grain size and ferrite number between TIG welding and active flux TIG (ATIG) welding was done. The A-TIG welds were subjected to bend test. A comparative study of TIG and A-TIG welding shows that A-TIG welding increases the weld penetration depth, they have good bending properties, and ferrite number slightly increases.
A-TIG welding; austenitic stainless steel; QuickTIG active flux; microstructure; bend test
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
189-196.
2016.
objavljeno
Podaci o matičnoj publikaciji
Zavarivanje - Welding 2016
Bauer, Branko ; Garašić, Ivica
Zagreb: Hrvatsko društvo za tehniku zavarivanja
978-953-7518-04-2
Podaci o skupu
Zavarivanje - Welding 2016
predavanje
08.06.2016-11.06.2016
Opatija, Hrvatska