Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Dimensional accuracy of camera casing models 3D printed on Mcor IRIS: A case study (CROSBI ID 227033)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Mandić, Matej ; Galeta, Tomislav ; Raos, Pero ; Jugović, Valentino Dimensional accuracy of camera casing models 3D printed on Mcor IRIS: A case study // Advances in production engineering & management, 11 (2016), 4; 324-332. doi: 10.14743/apem2016.4.230

Podaci o odgovornosti

Mandić, Matej ; Galeta, Tomislav ; Raos, Pero ; Jugović, Valentino

engleski

Dimensional accuracy of camera casing models 3D printed on Mcor IRIS: A case study

The main objective of this research was to determine the deviations and evalu-ate the dimensional accuracy of 3D printed camera casing models compared to the original models in the STL format. The study sample consisted of the 3D printed camera casing models and the same models in the STL format. The STL format came from Mcor in a set of sample models shipped with the 3D printer. The models were 3D printed on Mcor IRIS and then scanned with ATOS 3D scanner. A comparison between the scanned and original STL models was made in the GOM Inspect software. The results indicate that the maximum deviation occurred on the scanned front camera cover and it is 0.82 mm in the direction z. The average deviation of scanned front camera cover is 0.0845 mm and the average deviation of scanned back camera cover is 0.0722 mm. The analysis of the results proves that the three-dimensional printed paper-based parts have the dimensions close to the original CAD models.

deviation ; accuracy ; 3D printing ; 3D scanning ; Mcor IRIS

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

11 (4)

2016.

324-332

objavljeno

1854-6250

1855-6531

10.14743/apem2016.4.230

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost