Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Dual-channel Programmable Precise Time-delay Pulse Signal Generator for Synchronous DC-DC Converter Applications (CROSBI ID 633996)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Hormot, Filip ; Bačmaga, Josip ; Barić, Adrijan Dual-channel Programmable Precise Time-delay Pulse Signal Generator for Synchronous DC-DC Converter Applications // Proceedings of the 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2015). Opatija: Institute of Electrical and Electronics Engineers (IEEE), 2015. str. 98-102 doi: 10.1109/MIPRO.2015.7160246

Podaci o odgovornosti

Hormot, Filip ; Bačmaga, Josip ; Barić, Adrijan

engleski

Dual-channel Programmable Precise Time-delay Pulse Signal Generator for Synchronous DC-DC Converter Applications

A precise two-channel programmable time-delay pulse signal generator for synchronous DC- DC converter applications is presented. The developed system is required to generate high- side (HS) and low-side (LS) signal in frequency range from 1 MHz to 15 MHz and duty cycle values from 5% to 50%. While both generated signals have the same switching frequency, the pulse width and time-delay of each signal is adjusted independently of the other signal. The most notable characteristic of the developed generator is the ability to adjust dead-times between the generated signals as precise as possible in order to use the signal generator for testing the semiconductor devices for synchronous DC-DC converter applications. The developed signal generator has the ability to set the pulse width and time-delay with the precision of 250 ps. The system is designed to transmit generated signals using either the BNC or optical fiber cable. The functionality of the system is verified by measurements performed under various operating conditions.

driving signals ; pulse-width modulation ; dead-time adjustment ; fiber optic transmitter

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

98-102.

2015.

objavljeno

10.1109/MIPRO.2015.7160246

Podaci o matičnoj publikaciji

Proceedings of the 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2015)

Opatija: Institute of Electrical and Electronics Engineers (IEEE)

Podaci o skupu

MIPRO 2015

predavanje

25.05.2015-29.05.2015

Opatija, Hrvatska

Povezanost rada

Elektrotehnika

Poveznice