Investigation of microstructural and mechanical characteristics of the alloys from section with 90 at % Cu in ternary Cu-Al-Ag system (CROSBI ID 631515)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa
Podaci o odgovornosti
Stanojević Šimšić, Zdenka ; Živković, Dragana ; Holjevac Grgurić, Tamara ; Marković, Ivana ; Marković, Desimir ; Todorović, Radiša ; Manasijević, Dragan ; Kostov, Ana Mirko Gojić, KatarinaTerzić
engleski
Investigation of microstructural and mechanical characteristics of the alloys from section with 90 at % Cu in ternary Cu-Al-Ag system
The results of microstructural and mechanical characteristics of some alloys in Cu-Al-Ag system are presented in this paper. Investigated alloys were chosen from Cu-rich corner of the ternary system, with 90 at% of copper. The samples were examined according to metallographic procedure using optical microscopy and SEM-EDX analysis, while standard procedures were used for microhardness measurements and hardness measurements by Vickers.
Cu-Al-Ag system ; ternary alloys ; microstructural investigation ; mechanical characteristics
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1-1.
2014.
objavljeno
Podaci o matičnoj publikaciji
Proceedings Book of 14th International Foundrymen Conference-Development and Optimatization of the Castings Production Processes
Faruk, Unkić
Zagreb: Metalurški fakultet Sveučilišta u Zagrebu
9789537082178
Podaci o skupu
14th International Foundrymen Conference- Development and Optimatization of the Castings Production Processes
poster
15.05.2014-16.05.2014
Opatija, Hrvatska