Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Estimation of hoop residual stress in the hot-rolled tubes (CROSBI ID 631413)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Damjanović, Darko ; Kozak, Dražan ; Gubeljak, Nenad ; Ivandić, Željko Estimation of hoop residual stress in the hot-rolled tubes // Proceedings of Second International Conference Modern methods of testing and evaluation in science / Petronić, Sanja ; Bojković, Nataša (ur.). Beograd: Scientific association for development and affirmation of new technologies, 2015. str. 69-75

Podaci o odgovornosti

Damjanović, Darko ; Kozak, Dražan ; Gubeljak, Nenad ; Ivandić, Željko

engleski

Estimation of hoop residual stress in the hot-rolled tubes

The aim of this work is to estimate the hoop residual stresses in the tubes manufactured by hot rolling technique, since in most cases they are delivered only normalized, but not stress relieved too. Therefore, there are surly residual stresses present in tubes which are result of manufacturing technique, but also of uneven cooling after production process. Within this work, hoop stress as the most relevant for pipes and tubes is estimated by two methods: incremental hole drilling method and splitting method. Splitting method is a method for direct assessment of hoop stress in pipe or tube, but the incremental hole drilling method gives the results of principal stresses, so in case of incremental hole drilling method, also the transformation of stresses is presented in order to obtain the hoop stress and make comparison to the splitting method. Although residual stresses are cause of collapse of many constructions, still in most cases of analysis and design of individual parts, structures and plants residual stresses are not taken into consideration. Residual stresses surly have significant effect on the fatigue behavior of materials as well as on the fracture toughness of material, therefore it is recommended to take them into account while calculating the lifetime of component or structure.

residual stress; pipe; tube; hoop stress; incremental hole drilling method; splitting method

UDK 621.791: 66.026.2

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

69-75.

2015.

nije evidentirano

objavljeno

978-86-918415-1-5

Podaci o matičnoj publikaciji

Proceedings of Second International Conference Modern methods of testing and evaluation in science

Petronić, Sanja ; Bojković, Nataša

Beograd: Scientific association for development and affirmation of new technologies

Podaci o skupu

2nd International Conference Modern methods of testing and evaluation in science

predavanje

14.12.2015-15.12.2015

Beograd, Srbija

Povezanost rada

Strojarstvo