The Possibility for Environmental Friendly Recycling of Printed Circuit Boards (CROSBI ID 223773)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Premur, Vitomir ; Anić Vučinić, Aleksandra ; Vujević, Dinko ; Bedeković, Gordan
engleski
The Possibility for Environmental Friendly Recycling of Printed Circuit Boards
The goal of this work is to find a solution for disposal of Vitroplast FR4, a material found in waste printed circuit boards. In this study, the influence of addition of Vitroplast, generated by mechanical treatment of printed circuit boards waste on concrete properties such as compressive strength was investigated in laboratory conditions. By substitution of filler (i.e. sand) in a mass ratio of 5, 10, 15 and 20% with Vitroplast in concrete mixture, the compressive strength decreased into 57.5, 84.5, 95.0 and 95.9%. The results of leaching tests have shown that by incorporating Vitroplast in concrete mixtures in a 10% mass ratio, the elution of arsenic and cadmium is below the limitations prescribed for inert wastes. The studied approach offers the possibility for environmental friendly recycling of printed circuit boards.
Printed Circuit Boards ; Recycling ; Vitroplast FR4 ; Concrete Production ; Waste Management ; Environmental Protection
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
4 (1)
2016.
14-22
objavljeno
1848-9257
10.13044/j.sdewes.2016.04.0002
Povezanost rada
Interdisciplinarne tehničke znanosti, Rudarstvo, nafta i geološko inženjerstvo, Temeljne tehničke znanosti