Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 785728

DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING


Todić, Rajko; Bartulović, Ante; Novak, Ivan; Marfat, Tomislav
DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Croatian Association of Production Engineering, 2015. str. 235-238 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 785728 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING

Autori
Todić, Rajko ; Bartulović, Ante ; Novak, Ivan ; Marfat, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir - Zagreb : Croatian Association of Production Engineering, 2015, 235-238

ISBN
978-953-7689-03-2

Skup
15th International Scientific Conference on Production Engineering CIM 2015

Mjesto i datum
Vodice, Hrvatska, 10-13.6.2015

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
deep micro-drilling; adaptive control; micro-drilling machine

Sažetak
An increase in the production of micro-components causes a need for the development of appropriate manufacturing techniques, one of which is deep-micro-hole-drilling. This paper presents the development of an adaptive machining system for deep micro hole drilling whereby adaptive control is recognized through thrust force. The drilling of 0, 5 mm diameter holes in special cast irons with up to 40:1 depth to diameter ratio is performed. Due to the problems related with micro hole drilling in respect to conventional drilling and expressive heterogeneity of workpiece materials, it is shown that the use of an adaptive control can be of significant improvement for insurance of an adequate micro drilling process.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Profili:

Avatar Url Rajko Todić (autor)

Poveznice na cjeloviti tekst rada:

Pristup cjelovitom tekstu rada

Citiraj ovu publikaciju:

Todić, Rajko; Bartulović, Ante; Novak, Ivan; Marfat, Tomislav
DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Croatian Association of Production Engineering, 2015. str. 235-238 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Todić, R., Bartulović, A., Novak, I. & Marfat, T. (2015) DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING. U: Abele, E., Udiljak, T. & Ciglar, D. (ur.)Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering.
@article{article, year = {2015}, pages = {235-238}, keywords = {deep micro-drilling, adaptive control, micro-drilling machine}, isbn = {978-953-7689-03-2}, title = {DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING}, keyword = {deep micro-drilling, adaptive control, micro-drilling machine}, publisher = {Croatian Association of Production Engineering}, publisherplace = {Vodice, Hrvatska} }
@article{article, year = {2015}, pages = {235-238}, keywords = {deep micro-drilling, adaptive control, micro-drilling machine}, isbn = {978-953-7689-03-2}, title = {DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING}, keyword = {deep micro-drilling, adaptive control, micro-drilling machine}, publisher = {Croatian Association of Production Engineering}, publisherplace = {Vodice, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font