CONCEPT DESIGN FOR MACHINE TO CUT RAW RUBBER TO RIBBONS (CROSBI ID 628581)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Štefek, Zdenko ; Karakašić, Mirko ; Ivandić, Željko ; Kljajin, Milan
engleski
CONCEPT DESIGN FOR MACHINE TO CUT RAW RUBBER TO RIBBONS
The paper presents design process for concept variant for machine cutting raw rubber into ribbons. Using the flow function modelling method transformation of the operands was shown. Function as a part of the total transformation, causes a certain change of characteristics of the operand that is realised by the physical bearer of the function (technical solution). Technical solution is a machine for cutting raw rubber. The machine is constructed to allow reception of raw rubber rolls of various dimensions, as well as cutting into ribbons of various widths. The techno-economic evaluation was carried out and the best solution of the concept variant of the machine was chosen.
Conceptual design; functional decomposition; morphological matrix; rubber
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
59-63.
2015.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society
prof. Aleksandar Sedmak
Beograd: Mašinski fakultet Univerziteta u Beogradu
978-86-7083-876-5
Podaci o skupu
7th International Scientific and Expert Conference of the International TEAM Society
predavanje
01.01.2015-01.01.2015
Belgrade, Serbia