Validation of the developed triaxial nonlinear material model for concrete (CROSBI ID 628104)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Galić, Mirela ; Marović, Pavao
engleski
Validation of the developed triaxial nonlinear material model for concrete
This paper presents validation of newly developed material model for concrete. The model is based on combination of elasto-fracture-plastic formulation, considering all dominant influences in concrete: yielding in compression, fracture in tension, softening and hardening. The modified Mohr-Coulomb criterion for dominant compression stresses, the modified Rankine criterion for dominant tension stresses, exponential softening and function for hardening are considered in this model. All constitutive equations are defined by elementary material parameters (Young’s modulus of elasticity, Poisson’s coefficient, maximal uniaxial tensile and compression stresses, coefficient of tensile correction, maximal tensile and maximal compression strains). A multi-surface presentation of the model is implemented which permits the rapid convergence of the mathematical procedure. Model uses return-mapping algorithm for the integration of the constitutive equations with associated and non-associated flow rules. Considering triaxial stress state, this paper presents the structural validation of developed numerical model, PRECON3D, on two examples: (i) four-point bending of normal-strength and high-strength reinforced concrete beams with four different constant-zone lengths and two different reinforcement ratios ; (ii) prestressed Π-beam. Developed model is incorporated into computer programme PRECON3D and its performances are evaluated by comparison with various experimental and numerical results from the literature.
validation; triaxial material model; concrete; numerical analysis; reinforced concrete; prestressed concrete
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
Galic-1-Galic-16.
2015.
objavljeno
Podaci o matičnoj publikaciji
CD Proceedings of the 8th International Congress of Croatian Society of Mechanics
Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko
Zagreb: Hrvatsko društvo za mehaniku (HDM)
978-953-7539-21-4
Podaci o skupu
8th International Congress of Croatian Society of Mechanics
predavanje
20.09.2015-02.10.2015
Opatija, Hrvatska