Napredna pretraga

Pregled bibliografske jedinice broj: 779963

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis


Dragičević, Mario; Jozić, Sonja; Bajić, Dražen
Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis // 5th International Conference of Mechanical Technologies and Structural Materials
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)


Naslov
Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis

Autori
Dragičević, Mario ; Jozić, Sonja ; Bajić, Dražen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Skup
5th International Conference of Mechanical Technologies and Structural Materials

Mjesto i datum
Split, Hrvatska, 24. i 25.09.2015

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Optimization Taguchi method Grey relational analysis ANOVA Milling

Sažetak
In this study, Taguchi method is shown in combination with the Grey relational analysis which is applied in cutting parameters optimization during end-milling of 42CrMo4 steel, in order to reach minimum value of surface roughness, and maximum quantity of removed material in unit of time. Parameters which are being optimized are cutting speed (vc), depth of cut (ae), feed rate per tooth (ft) as well as different processing conditions: dry machining, conventional emulsion cooling and cooling by cold compressed air. Based on given input parameters, with the help of Taguchi L9 orthogonal array and Grey relational analysis, optimal combination of cutting parameters by which set requests are being reached is obtained. Furthermore, analysis of variance (ANOVA) is applied for recognition of the most influencing parameters on optimal solution in the process of machining. Taguchi method combined with the Grey relational analysis is satisfactorily used in multiple criteria optimization of end-milling.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Fakultet elektrotehnike, strojarstva i brodogradnje, Split