Development and Testing of Five-Axis Postprocessors (CROSBI ID 626509)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Mihoci, Kristijan ; Pavlic, Tomislav
engleski
Development and Testing of Five-Axis Postprocessors
Five-axis machining has been developed with development of five-axis machines with modern control units. Programming of five-axis machines is complex, and manual programming almost has no sense. Thus, today programmers for this kind of job uses very often CAD-CAM systems. Last link for good functioning between CAD-CAM system and machine is postprocessor. In this work is shown development and testing of two postprocessors for five-axis machines. One postprocessor is for machine with 3 simultaneous axis, and positioning in fourth and fifth axis. Another one is developed for simultaneous work in all five axis. Testing has been done on exact examples from practice. Because of extra possibilities on control units, postprocessors are need to be updated to new versions.
five-axis postprocessor ; CAD-CAM systems ; five-axis machining
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1-6.
2009.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the CIM 2009-12th International Scientific Conference on Production Engineering
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-03-2
Podaci o skupu
12th INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING
predavanje
17.06.2009-20.06.2009
Biograd na Moru, Hrvatska