Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 773194

Simulation of Chain Saw Cutting Process with Linear Cutting Machine


Korman, Tomislav; Kujundžić, Trpimir; Kuhinek, Dalibor
Simulation of Chain Saw Cutting Process with Linear Cutting Machine // International journal of rock mechanics and mining sciences, 78 (2015), 283-289 doi:10.1016/j.ijrmms.2015.07.004 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 773194 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Simulation of Chain Saw Cutting Process with Linear Cutting Machine

Autori
Korman, Tomislav ; Kujundžić, Trpimir ; Kuhinek, Dalibor

Izvornik
International journal of rock mechanics and mining sciences (1365-1609) 78 (2015); 283-289

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Rock cutting; Dimension stone; Chain saw; Linear cutting machine; Cutting forces; Cutting energy

Sažetak
The understanding of the influence of certain quantities on chain saw performance and the wear of cutting tools as well as the understanding of the interaction of certain factors and the way their individual and mutual effects influence the overall exploitation process, enables the selection of the optimum tools and the optimum operational regime. It is possible to analyse chain saw performance on the basis of cutting forces and cutting energy. Considering the very complex interaction between tools and rocks, the existing analytical models for calculating cutting forces are not sufficiently reliable. Therefore laboratory experiments were conducted on a linear rock cutting machine which enables the direct measurement of cutting forces. To measure cutting forces a triaxial force transducer was designed and constructed in the way to enable the use of original chain saw cutting elements in actual size. In order to verify the possibility of using the linear rock cutting machine in the simulation of chain saw cutting process, field experiments were conducted to measure chain saw cutting energy under real conditions of quarrying dimension stones. The experiments showed that the results obtained in the simulation of cutting process can be used to optimize chain saw constructional and operational parameters.

Izvorni jezik
Engleski

Znanstvena područja
Rudarstvo, nafta i geološko inženjerstvo



POVEZANOST RADA


Ustanove
Rudarsko-geološko-naftni fakultet, Zagreb

Citiraj ovu publikaciju

Korman, Tomislav; Kujundžić, Trpimir; Kuhinek, Dalibor
Simulation of Chain Saw Cutting Process with Linear Cutting Machine // International journal of rock mechanics and mining sciences, 78 (2015), 283-289 doi:10.1016/j.ijrmms.2015.07.004 (međunarodna recenzija, članak, znanstveni)
Korman, T., Kujundžić, T. & Kuhinek, D. (2015) Simulation of Chain Saw Cutting Process with Linear Cutting Machine. International journal of rock mechanics and mining sciences, 78, 283-289 doi:10.1016/j.ijrmms.2015.07.004.
@article{article, year = {2015}, pages = {283-289}, DOI = {10.1016/j.ijrmms.2015.07.004}, keywords = {Rock cutting, Dimension stone, Chain saw, Linear cutting machine, Cutting forces, Cutting energy}, journal = {International journal of rock mechanics and mining sciences}, doi = {10.1016/j.ijrmms.2015.07.004}, volume = {78}, issn = {1365-1609}, title = {Simulation of Chain Saw Cutting Process with Linear Cutting Machine}, keyword = {Rock cutting, Dimension stone, Chain saw, Linear cutting machine, Cutting forces, Cutting energy} }

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • Geobase
  • INSPEC


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font