engleski

Generic approach to calculation of short circuit currents in power transformers

Power transformer in service is exposed to various voltage and current stresses. The ability to withstand short circuit is an essential requirement for power transformers. There are different types of short circuit: single - phase to earth, double - phase with or without simultaneous earth fault and three - phase short circuit. These various short circuit conditions result in different stress conditions for the windings. Mesh analysis and symmetrical components are the two methods most commonly used for determining the magnitude of short circuit currents. In this paper, both methods will be presented with results compared on a real-case transformer. Also, a generic scheme using the symmetrical components approach is designed in order to standardize the short-circuit currents calculation for all power transformer types and to reduce the time required for obtaining results.

power transformer; symmetrical components; short circuit; inductance matrix;

nije evidentirano