An Overview of the Development and Use of Coolant and Lubricant Systems in Machining (CROSBI ID 625116)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kostadin, Tihana ; Cukor, Goran
engleski
An Overview of the Development and Use of Coolant and Lubricant Systems in Machining
This paper gives a review of the development of the coolant and lubricant systems, starting from the classic ones, which are used in the machining, and then it deals with both the dry processing and the alternative methods of cooling during the machining. The influence of coolants and lubricants on the environment and the people's health is emphasized as well as the implementation of cooling with cold compressed air. Cold compressed air can replace the function of classic coolants and lubricants during the cooling of both tool and machining parts, and also on the cooling of the chips and their elimination from the machining area. The vortex tube is mostly used in cold compressed air cooling, which enables the separation of hot and cold air during the flow of compressed air across the incoming nozzles tangentially into the vortex chamber.
coolants and lubricants; dry machining; cooling with cold compressed air
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
153-160.
2015.
objavljeno
Podaci o matičnoj publikaciji
CIM 2015: Computer Integrated Manufacturing and High Speed Machining
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-03-2
Podaci o skupu
15th INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING
predavanje
10.06.2015-13.06.2015
Vodice, Hrvatska