Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 763314

Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel


Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Jačan, Jurica; Bogdanić, Dino
Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 763314 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel

Autori
Cajner, Franjo ; Landek, Darko ; Rafael, Hrvoje ; Jačan, Jurica ; Bogdanić, Dino

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress / - Milano : Associazone Italiana di Metallurgia, 2015

ISBN
978-88-98990-03-0

Skup
The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress

Mjesto i datum
Venecija, Italija, 20-22.05.2015

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
DC PACVD; TiN/TiCN; TiN/Ti-B-N; K390 MC cold work tool steel; abrasive wear; erosive wear

Sažetak
This paper investigates the abrasive and erosive wear of TiN/TiCN and TiN/Ti-B-N multilayers deposited on the quenched and tempered K390 MC tool steel for cold work. The multilayer coatings were produced by the pulsed direct current (DC) plasma-assisted chemical-vapour deposition (PACVD) in an industrial hot wall furnace. Adhesion of the multilayers is determined by the Rockwell-C indentation test. Abrasive wear resistance tests were carried out using the "Dry Sand/Rubber Wheel” method. Erosion resistance tests of the base material and of the PACVD coatings were carried out by exposing test samples to impact erosion using fine sand particles and by determining the mass loss after 60 minutes of wear. Worn surfaces were analysed by a scanning electron microscope. The results show an increased wear resistance of the TiN/Ti-B-N multilayer coating with respect to the TiN/TiCN multilayer coating and the non-coated steel K390 MC (in the quenched and tempered condition).

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Hrvoje Rafael (autor)

Avatar Url Darko Landek (autor)

Avatar Url Franjo Cajner (autor)

Citiraj ovu publikaciju

Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Jačan, Jurica; Bogdanić, Dino
Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Cajner, F., Landek, D., Rafael, H., Jačan, J. & Bogdanić, D. (2015) Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. U: Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress.
@article{article, year = {2015}, keywords = {DC PACVD, TiN/TiCN, TiN/Ti-B-N, K390 MC cold work tool steel, abrasive wear, erosive wear}, isbn = {978-88-98990-03-0}, title = {Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel}, keyword = {DC PACVD, TiN/TiCN, TiN/Ti-B-N, K390 MC cold work tool steel, abrasive wear, erosive wear}, publisher = {Associazone Italiana di Metallurgia}, publisherplace = {Venecija, Italija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font