Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel (CROSBI ID 624487)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Cajner, Franjo ; Landek, Darko ; Rafael, Hrvoje ; Jačan, Jurica ; Bogdanić, Dino
engleski
Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel
This paper investigates the abrasive and erosive wear of TiN/TiCN and TiN/Ti-B-N multilayers deposited on the quenched and tempered K390 MC tool steel for cold work. The multilayer coatings were produced by the pulsed direct current (DC) plasma-assisted chemical-vapour deposition (PACVD) in an industrial hot wall furnace. Adhesion of the multilayers is determined by the Rockwell-C indentation test. Abrasive wear resistance tests were carried out using the "Dry Sand/Rubber Wheel” method. Erosion resistance tests of the base material and of the PACVD coatings were carried out by exposing test samples to impact erosion using fine sand particles and by determining the mass loss after 60 minutes of wear. Worn surfaces were analysed by a scanning electron microscope. The results show an increased wear resistance of the TiN/Ti-B-N multilayer coating with respect to the TiN/TiCN multilayer coating and the non-coated steel K390 MC (in the quenched and tempered condition).
DC PACVD; TiN/TiCN; TiN/Ti-B-N; K390 MC cold work tool steel; abrasive wear; erosive wear
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2015.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia
978-88-98990-03-0
Podaci o skupu
The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
poster
20.05.2015-22.05.2015
Venecija, Italija