Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 760240

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech


Siklienka, Mikuláš; Kminiak, Richard; Argay, Filip; Šafran, Branimir; Đukić, Igor
Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech // Drvna industrija : znanstveno-stručni časopis za pitanja drvne tehnologije, 66 (2015), 1; 41-48 doi:10.5552/drind.2015.1412 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 760240 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

Autori
Siklienka, Mikuláš ; Kminiak, Richard ; Argay, Filip ; Šafran, Branimir ; Đukić, Igor

Izvornik
Drvna industrija : znanstveno-stručni časopis za pitanja drvne tehnologije (0012-6772) 66 (2015), 1; 41-48

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
horizontal log band saw; band saw blade; stellite teeth; swaged teeth; cutting wedge wear; cutting power; surface quality

Sažetak
The paper presents the research results of process characteristics during cutting beech prisms on horizontal log band saw type Mebor HTZ–1000. The band saw blades were equipped with swaged teeth and stellited teeth. The power consumption, tool wear resistance, surface roughness and variation of board thickness during 6000 m sawn prism length were studied. All studied parameters were monitored during the tool life-circle (from sharpening to loosing its sawing capability). Wearing process was monitored as a function of cutting length. The cutting edge modi fi cation, i.e. its wearing affecting energetic demands during sawing process as well as the surface quality and dimension accuracy of produced work piece was monitored, too. Based on cutting edge wear process and its effect on the above mentioned sawing process parameters, the optimal period of saw band replacement with a new or sharpened one was determined. Based on measured parameters, it was possible to determine which type of band saw tooth is recommended for cutting frozen beech.

Izvorni jezik
Engleski

Znanstvena područja
Drvna tehnologija



POVEZANOST RADA


Ustanove:
Šumarski fakultet, Zagreb

Profili:

Avatar Url Branimir Šafran (autor)

Avatar Url Igor Đukić (autor)

Citiraj ovu publikaciju

Siklienka, Mikuláš; Kminiak, Richard; Argay, Filip; Šafran, Branimir; Đukić, Igor
Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech // Drvna industrija : znanstveno-stručni časopis za pitanja drvne tehnologije, 66 (2015), 1; 41-48 doi:10.5552/drind.2015.1412 (međunarodna recenzija, članak, znanstveni)
Siklienka, M., Kminiak, R., Argay, F., Šafran, B. & Đukić, I. (2015) Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech. Drvna industrija : znanstveno-stručni časopis za pitanja drvne tehnologije, 66 (1), 41-48 doi:10.5552/drind.2015.1412.
@article{article, year = {2015}, pages = {41-48}, DOI = {10.5552/drind.2015.1412}, keywords = {horizontal log band saw, band saw blade, stellite teeth, swaged teeth, cutting wedge wear, cutting power, surface quality}, journal = {Drvna industrija : znanstveno-stru\v{c}ni \v{c}asopis za pitanja drvne tehnologije}, doi = {10.5552/drind.2015.1412}, volume = {66}, number = {1}, issn = {0012-6772}, title = {Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech}, keyword = {horizontal log band saw, band saw blade, stellite teeth, swaged teeth, cutting wedge wear, cutting power, surface quality} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • CAB Abstracts
  • CA Search (Chemical Abstracts)
  • Compendex (EI Village)
  • Geobase
  • Paperchem
  • SCOPUS
  • EBSCO
  • DOAJ


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font