Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

SEM-EDS Analysis of Composite Al2O3-ZrO2 Ceramics Eroded with SiC Particles (CROSBI ID 215480)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Grilec, Krešimir ; Ćurković, Lidija ; Majić Renjo, Marijana ; Jakovljević, Suzana ; Sakoman, Matija ; Sladojević, Milan SEM-EDS Analysis of Composite Al2O3-ZrO2 Ceramics Eroded with SiC Particles // Applied Mechanics and Materials, 729 (2015), 27-31

Podaci o odgovornosti

Grilec, Krešimir ; Ćurković, Lidija ; Majić Renjo, Marijana ; Jakovljević, Suzana ; Sakoman, Matija ; Sladojević, Milan

engleski

SEM-EDS Analysis of Composite Al2O3-ZrO2 Ceramics Eroded with SiC Particles

In this paper, composite Al2O3–t-ZrO2 ceramics (composition: 95 wt. % Al2O3 – 5 wt. % t-ZrO2 and 90 wt. % Al2O3 – 10 wt. % t-ZrO2) was formed by slip casting in plaster mould. After drying, green bodies were sintered in laboratory electric kiln under air environment at a temperature of 1650 °C. Erosive wear resistance of sintered monolithic Al2O3 and composite Al2O3–t-ZrO2 ceramics was determined by SEM analysis of the sample surface morphology before and after erosion at impact angle of 90° and SiC as erodent particles. Surface morphology analysis after erosion showed that wear scars were significantly larger on Al2O3 than on Al2O3–t- ZrO2 samples. All conducted tests showed that tribological properties of monolithic Al2O3 can be improved with the addition of t-ZrO2.

Al2O3 ; Al2O3–t-ZrO2 ; slip casting ; solid particle erosion

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

729

2015.

27-31

objavljeno

1660-9336

1662-7482

Povezanost rada

Kemijsko inženjerstvo, Strojarstvo