Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 733324

Modelling of diesel injection process using Eulerian multiphase approach


Vujanović, Milan; Petranović, Zvonimir; Duić, Neven; Baleta, Jakov
Modelling of diesel injection process using Eulerian multiphase approach // Digital Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. str. SDEWES2014.0602-1 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 733324 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Modelling of diesel injection process using Eulerian multiphase approach

Autori
Vujanović, Milan ; Petranović, Zvonimir ; Duić, Neven ; Baleta, Jakov

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Digital Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] - Zagreb : University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014, SDEWES2014.0602-1

Skup
9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014S

Mjesto i datum
Venecija, Italija - Istanbul, Turska, 20-27.09.2014

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
CFD; modelling; diesel; spray

Sažetak
Numerical simulations of spray formed by high pressure fuel injectors are usually modelled by Euler Lagrangian method, where motion of the droplet parcels is tracked through the flow field using Lagrangian formulation. The computational effort for this method increases drastically with increasing parcel number, making it useful mainly for sufficiently diluted spray. This method is not applicable in the dense spray region where the volume fraction of the dispersed phase is high. As a result the Eulerian multiphase approach was applied in this work. The Eulerian multiphase approach provides stronger physical coupling of the gas and liquid phase in the near nozzle dense spray region. This modelling approach treats all phases, gas and liquids, as interpenetrating multi-fluids represented by their volume fractions. A separate set of complete conservation equations, with additional source terms accounting for droplet dynamics, is solved for each phase with the same discretization and similar numerical techniques. The combustion process is highly dependent upon the fuel-air mixture process, which is strongly influenced by the atomisation and evaporation processes. Thus, the understanding of the spray process is essential in internal combustion engine development. The understanding of the spray process can be improved by numerical modelling and computer simulations. Two simulations of high pressure diesel injections combined with different chamber pressures were calculated and compared with the available measurement data. The results show favourable agreement when compared with the measurements, and yield the correct trends for both liquid and vapour penetration under different operating condition.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
120-1201918-1920 - Racionalno skladištenje energije za održivi razvoj energetike (Duić, Neven, MZOS ) ( POIROT)

Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Milan Vujanović (autor)

Avatar Url Neven Duić (autor)

Avatar Url Jakov Baleta (autor)

Avatar Url Zvonimir Petranović (autor)


Citiraj ovu publikaciju:

Vujanović, Milan; Petranović, Zvonimir; Duić, Neven; Baleta, Jakov
Modelling of diesel injection process using Eulerian multiphase approach // Digital Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. str. SDEWES2014.0602-1 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Vujanović, M., Petranović, Z., Duić, N. & Baleta, J. (2014) Modelling of diesel injection process using Eulerian multiphase approach. U: Ban, M. (ur.)Digital Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES.
@article{article, editor = {Ban, M.}, year = {2014}, pages = {SDEWES2014.0602-1-SDEWES2014.0602-13}, keywords = {CFD, modelling, diesel, spray}, title = {Modelling of diesel injection process using Eulerian multiphase approach}, keyword = {CFD, modelling, diesel, spray}, publisher = {University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture}, publisherplace = {Venecija, Italija - Istanbul, Turska} }
@article{article, editor = {Ban, M.}, year = {2014}, pages = {SDEWES2014.0602-1-SDEWES2014.0602-13}, keywords = {CFD, modelling, diesel, spray}, title = {Modelling of diesel injection process using Eulerian multiphase approach}, keyword = {CFD, modelling, diesel, spray}, publisher = {University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture}, publisherplace = {Venecija, Italija - Istanbul, Turska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font