Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Comparison of antifriction properties of polymer composites and bronze (CROSBI ID 211439)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Opalić, Milan ; Domitran, Zoran ; Katana, Branko Comparison of antifriction properties of polymer composites and bronze // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 21 (2014), 5; 1089-1095. doi: 621.822.1.031:678.7

Podaci o odgovornosti

Opalić, Milan ; Domitran, Zoran ; Katana, Branko

engleski

Comparison of antifriction properties of polymer composites and bronze

Polymer-based composites have been increasingly implemented as engineering material and as material for the fabrication of slide bearings. Their tribological properties and friction coefficient can be tested by laboratory procedures [1]. Polymer-based composites can replace bronze as engineering material for slide bearings in some applications. As an engineering material, bronze has a long history of implementation in various machines. Because of wide selection of literature and carried out studies on this material there is a certain amount of safety when selecting a construction element. The objective of this work is to study the friction coefficient of the polymer-based composite material compared to bronze as engineering material that has had a long history of application.

bronze; composite; friction; surface pressure

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

21 (5)

2014.

1089-1095

objavljeno

1330-3651

621.822.1.031:678.7

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost