Preparation of stable suspensions for slip casting of monolithic and composite ceramics (CROSBI ID 614498)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Majić Renjo, Marijana ; Ćurković, Lidija ; Grilec, Krešimir ; Sakoman, Matija
engleski
Preparation of stable suspensions for slip casting of monolithic and composite ceramics
Stability of highly concentrated (70 wt. %) aqueous suspensions of monolithic and composite ceramics suitable for slip casting was monitored by rheological properties measurements (flow curves and rheological parameters). Three groups of suspensions were prepared: monolithic Al2O3 and composite Al2O3– t-ZrO2 ceramics (composition: 95 wt. % Al2O3 – 5 wt. % t-ZrO2 and 90 wt. % Al2O3 – 10 wt. % t- ZrO2) with different amount of dispersant DOLAPIX CE 64. Recorded flow curves were fitted to the power law, Herschel-Bulkley and Bingham models. Minimal viscosity was determined for each prepared suspension, in order to determine optimal slip casting parameters. Obtained results showed that the amount of dispersant for required minimal viscosity increases with the increase of the t-ZrO2 amount.
Al2O3–t-ZrO2; slip casting; viscosity; flow curves
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
107-112.
2014.
objavljeno
Podaci o matičnoj publikaciji
4th international conference Mechanical technologies and structural materials, proceedings
Živković, Dražen
Split: Hrvatsko društvo za zaštitu materijala (HDZaMa)
1847-7917
Podaci o skupu
4th international conference Mechanical technologies and structural materials
predavanje
25.09.2014-26.09.2014
Split, Hrvatska