Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

A numerical elastic analysis on the interaction of twin edge cracks in a finite plate under tension (CROSBI ID 614492)

Neobjavljeno sudjelovanje sa skupa | neobjavljeni prilog sa skupa | međunarodna recenzija

Katinić, Marko ; Kozak, Dražan ; Konjatić, Pejo ; Damjanović, Darko A numerical elastic analysis on the interaction of twin edge cracks in a finite plate under tension // Fourteenth International Conference, New Trends in Fatigue and Fracture 2014, NT2F14 Beograd, Srbija, 15.09.2014-18.09.2014

Podaci o odgovornosti

Katinić, Marko ; Kozak, Dražan ; Konjatić, Pejo ; Damjanović, Darko

engleski

A numerical elastic analysis on the interaction of twin edge cracks in a finite plate under tension

Multiple cracks frequently appear in actual components, such as ageing aircrafts, pressure vessels, piping systems and others. A good understanding of the behaviour of crack interaction and coalescence is essential for reliable structural integrity assessment. In this paper, the interaction of twin edge cracks in a finite plate subjected to the remote tension is investigated. The stress intensity factors (SIFs) for these cracks are calculated using two- dimensional linear finite element analysis. The results of the calculation show that crack interaction intensity and the crack interaction limit at elastic condition are influenced by crack distance ratio and crack width ratio.

crack interaction; twin edge cracks; stress intensity factor; finite element analysis

Rad je predstavljen oralno u cijelosti na simpoziju.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

nije evidentirano

nije evidentirano

Podaci o skupu

Fourteenth International Conference, New Trends in Fatigue and Fracture 2014, NT2F14

predavanje

15.09.2014-18.09.2014

Beograd, Srbija

Povezanost rada

Strojarstvo