Napredna pretraga

Pregled bibliografske jedinice broj: 712407

Polypropylene/silica micro- and nanocomposites modified with poly(styrene-b-ethylene-co-butylene-b-styrene)


Pustak, Anđela; Denac, Matjaž; Leskovac, Mirela; Švab, Iztok; Musil, Vojko; Šmit, Ivan
Polypropylene/silica micro- and nanocomposites modified with poly(styrene-b-ethylene-co-butylene-b-styrene) // Journal of applied polymer science, 132 (2015), 6; 41486-41498 doi:10.1002/app.41486 (međunarodna recenzija, članak, znanstveni)


Naslov
Polypropylene/silica micro- and nanocomposites modified with poly(styrene-b-ethylene-co-butylene-b-styrene)

Autori
Pustak, Anđela ; Denac, Matjaž ; Leskovac, Mirela ; Švab, Iztok ; Musil, Vojko ; Šmit, Ivan

Izvornik
Journal of applied polymer science (0021-8995) 132 (2015), 6; 41486-41498

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Polypropylene composites; morphology; interfacial properties; mechanical properties; structure-property relationship

Sažetak
The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol% of poly(styrene-b-ethylene-co-butylene-b-styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano- vs. micro-) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally.

Izvorni jezik
Engleski

Znanstvena područja
Kemija, Kemijsko inženjerstvo



POVEZANOST RADA


Projekt / tema
098-0982904-2955 - Odnosi struktura-svojstvo modificiranih polimernih materijala (Irina Pucić, )
125-1252971-2575 - Inženjerstvo površina i međupovršina nanočestica u adhezijskim nanomaterijalima (Mirela Leskovac, )

Ustanove
Institut "Ruđer Bošković", Zagreb,
Fakultet kemijskog inženjerstva i tehnologije, Zagreb

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Citati