Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 704288

Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires


Katić, Višnja; Otmačić Ćurković, Helena; Semenski, Damir; Baršić, Gorana; Marušić, Katarina; Špalj, Stjepan
Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires // Angle orthodontist, 84 (2014), 6; 1041-1048 doi:10.2319/090413-651.1 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 704288 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires

Autori
Katić, Višnja ; Otmačić Ćurković, Helena ; Semenski, Damir ; Baršić, Gorana ; Marušić, Katarina ; Špalj, Stjepan

Izvornik
Angle orthodontist (0003-3219) 84 (2014), 6; 1041-1048

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
NiTi; surface coating; Three-point-bend test; corrosion; electrochemical testing

Sažetak
Objective: To analyze the effect of various coating formulations on the mechanical and corrosion properties of nickel-titanium (NiTi) orthodontic wires. Materials and Methods: Uncoated, rhodium-coated, and nitrified NiTi wires were observed with a three-point-bend test, surface roughness (Ra) measurement, scanning electron microscopy, energy dispersive spectroscopy, and electrochemical testing (open circuit potential, electrochemical impedance spectroscopy, and cyclic polarization scan). Differences in the properties of tested wire types were analyzed with analysis of variance and Tukey post hoc test. Results: Uncoated and nitrified NiTi wires showed similar mechanical and anticorrosive properties, while rhodium- coated NiTi wires showed the highest Ra and significantly higher modulus of elasticity, yield strength, and delivery of forces during loading but not in unloading. Rhodium-coated NiTi wires also had the highest corrosion current density and corrosion potential, lowest impedance modulus, and two time constants on Bode plot, one related to the Rh/Au coating and the other to underlying NiTi. Conclusion: Working properties of NiTi wires were unaffected by various coatings in unloading. Nitrification improved corrosion resistance. Rhodium coating reduced corrosion resistance and pronounced susceptibility to pitting corrosion in artificial saliva because of galvanic coupling between the noble coating and the base alloy.

Izvorni jezik
Engleski

Znanstvena područja
Kemija, Strojarstvo, Dentalna medicina



POVEZANOST RADA


Projekti:
13.06.2.1.53
120-0362321-2198 - Numerička i eksperimentalna istraživanja nelinearnih mehaničkih sustava (Wolf, Hinko, MZOS ) ( POIROT)

Ustanove:
Medicinski fakultet, Rijeka,
Fakultet strojarstva i brodogradnje, Zagreb,
Fakultet kemijskog inženjerstva i tehnologije, Zagreb,
Klinički bolnički centar Rijeka

Citiraj ovu publikaciju

Katić, Višnja; Otmačić Ćurković, Helena; Semenski, Damir; Baršić, Gorana; Marušić, Katarina; Špalj, Stjepan
Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires // Angle orthodontist, 84 (2014), 6; 1041-1048 doi:10.2319/090413-651.1 (međunarodna recenzija, članak, znanstveni)
Katić, V., Otmačić Ćurković, H., Semenski, D., Baršić, G., Marušić, K. & Špalj, S. (2014) Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires. Angle orthodontist, 84 (6), 1041-1048 doi:10.2319/090413-651.1.
@article{article, year = {2014}, pages = {1041-1048}, DOI = {10.2319/090413-651.1}, keywords = {NiTi, surface coating, Three-point-bend test, corrosion, electrochemical testing}, journal = {Angle orthodontist}, doi = {10.2319/090413-651.1}, volume = {84}, number = {6}, issn = {0003-3219}, title = {Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires}, keyword = {NiTi, surface coating, Three-point-bend test, corrosion, electrochemical testing} }
@article{article, year = {2014}, pages = {1041-1048}, DOI = {10.2319/090413-651.1}, keywords = {NiTi, surface coating, Three-point-bend test, corrosion, electrochemical testing}, journal = {Angle orthodontist}, doi = {10.2319/090413-651.1}, volume = {84}, number = {6}, issn = {0003-3219}, title = {Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires}, keyword = {NiTi, surface coating, Three-point-bend test, corrosion, electrochemical testing} }

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus
  • MEDLINE


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font