Napredna pretraga

Pregled bibliografske jedinice broj: 704064

Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products


Pilipović, Ana; Drstvenšek, Igor; Šercer, Mladen
Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products // Advances in mechanical engineering, (2014), 648562-1 doi:10.1155/2014/648562 (međunarodna recenzija, članak, znanstveni)


Naslov
Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products

Autori
Pilipović, Ana ; Drstvenšek, Igor ; Šercer, Mladen

Izvornik
Advances in mechanical engineering (1687-8132) (2014); 648562-1

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Energy density; mathematical model; mechanical properties; polymer; procesing parameters; selective laser sintering – SLS

Sažetak
Additive manufacturing (AM) is increasingly applied in the development projects from the initial idea to the finished product. The reasons are multiple, but what should be emphasised is the possibility of relatively rapid manufacturing of the products of complicated geometry based on the computer 3D model of the product.There are numerous limitations primarily in the number of available materials and their properties, which may be quite different from the properties of thematerial of the finished product. Therefore, it is necessary to know the properties of the productmaterials. In AMprocedures the mechanical properties of materials are affected by the manufacturing procedure and the production parameters. During SLS procedures it is possible to adjust various manufacturing parameterswhich are used to influence the improvement of various mechanical and other properties of the products. The paper sets a new mathematical model to determine the influence of individual manufacturing parameters on the polymer product made by selective laser sintering. Old mathematical model is checked by statistical method with central composite plan and it is established that old mathematical model must be expanded with new parameter beam overlay ratio. Verification of new mathematical model and optimization of the processing parameters are made on SLS machine.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Citiraj ovu publikaciju

Pilipović, Ana; Drstvenšek, Igor; Šercer, Mladen
Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products // Advances in mechanical engineering, (2014), 648562-1 doi:10.1155/2014/648562 (međunarodna recenzija, članak, znanstveni)
Pilipović, A., Drstvenšek, I. & Šercer, M. (2014) Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products. Advances in mechanical engineering,, 648562-1 doi:10.1155/2014/648562.
@article{article, year = {2014}, pages = {648562-1-648562-9}, DOI = {10.1155/2014/648562}, keywords = {energy density, mathematical model, mechanical properties, polymer, procesing parameters, selective laser sintering – SLS}, journal = {Advances in mechanical engineering}, doi = {10.1155/2014/648562}, issn = {1687-8132}, title = {Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products}, keyword = {energy density, mathematical model, mechanical properties, polymer, procesing parameters, selective laser sintering – SLS} }

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • INSPEC
  • Scopus


Citati