Napredna pretraga

Pregled bibliografske jedinice broj: 702915

A mobile robot based system for fully automated thermal 3D mapping


Borrmann, Dorit; Nüchter, Andreas; Đakulović, Marija; Maurović, Ivan; Petrović, Ivan; Osmanković, Dinko; Velagić, Jasmin
A mobile robot based system for fully automated thermal 3D mapping // Advanced engineering informatics, 28 (2014), 4; 425-440 doi:10.1016/j.aei.2014.06.002 (međunarodna recenzija, članak, znanstveni)


Naslov
A mobile robot based system for fully automated thermal 3D mapping

Autori
Borrmann, Dorit ; Nüchter, Andreas ; Đakulović, Marija ; Maurović, Ivan ; Petrović, Ivan ; Osmanković, Dinko ; Velagić, Jasmin

Izvornik
Advanced engineering informatics (1474-0346) 28 (2014), 4; 425-440

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
3D thermal mapping; autonomous mobile robots; calibration; next-best-view-planning; visualization

Sažetak
It is hard to imagine living in a building without electricity and a heating or cooling system these days. Factories and data centers are equally dependent on a continuous functioning of these systems. As beneficial as this development is for our daily life, the consequences of a failure are critical. Malfunctioning power supplies or temperature regulation systems can cause the close-down of an entire factory or data center. Heat and air conditioning losses in buildings lead to a large waste of the limited energy resources and pollute the environment unnecessarily. To detect these flaws as quickly as possible and to prevent the negative consequences constant monitoring of power lines and heat sources is necessary. To this end, we propose a fully automatic system that creates 3D thermal models of indoor environments. The proposed system consists of a mobile platform that is equipped with a 3D laser scanner, an RGB camera and a thermal camera. A novel 3D exploration algorithm ensures efficient data collection that covers the entire scene. The data from all sensors collected at different positions is joined into one common reference frame using calibration and scan matching. In the post- processing step a model is built and points of interest are automatically detected. A viewer is presented that aids experts in analyzing the heat flow and localizing and identifying heat leaks. Results are shown that demonstrate the functionality of the system.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika, Računarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekt / tema
036-0363078-3018 - Upravljanje mobilnim robotima i vozilima u nepoznatim i dinamičkim okruženjima (Ivan Petrović, )
ACROSS

Ustanove
Fakultet elektrotehnike i računarstva, Zagreb

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • Scopus


Citati