MICRO FRICTION STIR WELDING OF COPPER ELECTRICAL CONTACTS (CROSBI ID 611711)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Klobčar, Damjan ; Tušek, Janez ; Bizjak, Milan ; Bušić, Matija ; Lešer, Vladka
engleski
MICRO FRICTION STIR WELDING OF COPPER ELECTRICAL CONTACTS
Electrical industry is using high electro conductive copper likes CuOF, CuETP, CuOFP and CuAg 0.02 for production of different electronic products. Joining of copper or its alloys is difficult since the weldability of materials is limited using conventional welding technologies like arc welding and resistance welding or laser welding due to their properties like, good electrical and temperature conductivity and low electrical resistance. Weldability of these materials is better using friction welding technology, ultrasonic technology or vibrational technology. In this paper micro Friction Stir Welding (FSW) of electrical contacts is investigated. Different FSW tools are used and welding parameters are tested in order to find the welding parameters at which a sound weld could be obtained. Typical welding defects are evaluated and optimal welding parameters and tools are defined. A Vickers microhardness was measured and reveals the influence of welding parameters on the change of hardness.
micro friction stir welding (FSW); Cu ETP; tensile test; microstructure; welding defects
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
167-174.
2014.
objavljeno
Podaci o matičnoj publikaciji
Zavarivanje - Welding 2014
Kožuh, Zoran
Zagreb: Hrvatsko društvo za tehniku zavarivanja
975-953-7518-03-5
Podaci o skupu
Zavarivanje - Welding 2014
predavanje
28.05.2014-31.05.2014
Šibenik, Hrvatska