Correlation between the lams and printing element area on the flexographic printing plate (CROSBI ID 611662)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Tomašegović, Tamara ; Mahović Poljaček, Sanja ; Cigula, Tomislav ; Gojo, Miroslav ; Milčić, Diana
engleski
Correlation between the lams and printing element area on the flexographic printing plate
Production of a flexographic printing plate includes a number of procedures which have to be made in order to form a printing plate with optimal functional properties. One of the procedure which was observed in this paper is the application of the bump curves to zhe LAMS-based flexographic printing plate. The aim of the paper was to define and characterize the change in the dimensions of opening on LAMS when different bump curves werw applied. Results have shovn that combination values of the oxygen influence and the contraction of the photopolymer material results with the decreased coverage values on the bump curve in the LAMS-based flaxographic workflow should in conjunction with the change which occur in thephotopolymer material.
Bump Curve; Flexography; LAMS; Photopolymer;
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
43-49.
2014.
objavljeno
Podaci o matičnoj publikaciji
Proceeding, 7th Symposium of Information and Graphic Arts technology
Blaznik, Barbara
Ljubljana: Univetza v Ljubljani, Naravoslovnotehniška fakulteta, Oddelek za tekstilstvo
978-6900-09-6
Podaci o skupu
7th Symposium of Information and Graphic Arts technology
predavanje
05.06.2014-06.06.2014
Ljubljana, Slovenija