Decay Heat Calculation for Spent Fuel Pool Application (CROSBI ID 611514)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Grgić, Davor ; Šadek, Siniša ; Benčik, Vesna ; Konjarek , Damir
engleski
Decay Heat Calculation for Spent Fuel Pool Application
The automatic procedure was developed for fuel assembly decay heat calculation based on PARCS 3D burnup calculation for operating cycle depletion, and ORIGEN 2.1 calculation during both depletion and fuel cooling. Using appropriate pre - processor and post - processor codes it is possible to calculate fuel assembly decay heat loads for all fuel assembl ies discharged from reactor. Simple graphical application is then used to distribute fuel assemblies within fuel pool and to calculate any fuel assembly, SFP rack, or whole pool heat load at arbitrary time. The application can be used for overview of fuel assembly burnups, cooling times or decay heats. Based on given dat a it is possible to calculate whole pool heat load and time to boiling or time to assembly uncover using simple mass and energy balances. Calculated heat loads can be input to more detailed thermal - hydraulics calculations of spent fuel pool. The demonstration calculation was performed for NPP Krsko spent fuel pool.
spent fuel pool; decay heat calculation; ORIGEN; graphical representation of data
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
152-1-152-10.
2014.
nije evidentirano
objavljeno
978-953-55224-6-1
Podaci o matičnoj publikaciji
Proceedings of the 10th International Conference on Nuclear Option in Countries with Small and Medium Electricity Grids
Čavlina, Nikola ; Grgić, Davor ; Pevec, Dubravko
Zagreb: Hrvatsko nuklearno društvo
Podaci o skupu
10th International Conference on Nuclear Option in Countries with Small and Medium Electricity Grids
poster
01.06.2014-04.06.2014
Zadar, Hrvatska