Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

NPP Krško Containment Modelling with the ASTEC Code (CROSBI ID 611511)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Šadek, Siniša ; Grgić, Davor NPP Krško Containment Modelling with the ASTEC Code // Proceedings of the 10th International Conference on Nuclear Option in Countries with Small and Medium Electricity Grids / Čavlina, Nikola ; Grgić, Davor ; Pevec, Dubravko (ur.). Zagreb: Hrvatsko nuklearno društvo, 2014. str. 139-1-139-14

Podaci o odgovornosti

Šadek, Siniša ; Grgić, Davor

engleski

NPP Krško Containment Modelling with the ASTEC Code

ASTEC is an integral computer code jointly developed by Institut de Radioprotection et de Sûreté Nucléaire (IRSN, France) and Gesellschaft für Anlagen-und Reaktorsicherheit (GRS, Germany) to assess nuclear power plant behaviour during a severe accident (SA). It consists of 13 coupled modules which compute various SA phenomena in primary and secondary circuits of the nuclear power plants (NPP), and in the containment. The ASTEC code was used to model and to simulate NPP behaviour during a postulated station blackout accident in the NPP Krško, a two-loop pressurized water reactor (PWR) plant. The primary system of the plant was modelled with 110 thermal hydraulic (TH) volumes, 113 junctions and 128 heat structures. The secondary system was modelled with 76 TH volumes, 77 junctions and 87 heat structures. The containment was modelled with 10 TH volumes by taking into account containment representation as a set of distinctive compartments, connected with 23 junctions. A total of 79 heat structures were used to simulate outer containment walls, the containment foundation, internal steel and concrete structures. Prior to the transient calculation, a steady state analysis was performed. In order to achieve correct plant initial conditions, the operation of regulation systems was modelled. Parameters which were subjected to regulation were the pressurizer pressure, the pressurizer narrow range level and steam mass flow rates in the steam lines. The accident analysis was f ocused on containment behaviour ; however the complete integral NPP analys is was carried out in order to provide correct boundary conditions for the containment calculation. During the accident, the containment integrity was challenged by release of reactor system coolant through degraded coolant pump seals and, later in the acc ident following release of the corium out of the reactor pressure vessel, by the molten corium concrete interaction and direct containment heating mechanisms. Impact of those processes on relevant containment parameters, such as compartments pressures and temperatures, is going to be discussed in the paper.

ASTEC code; severe accident; PWR; containment

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

139-1-139-14.

2014.

nije evidentirano

objavljeno

978-953-55224-6-1

Podaci o matičnoj publikaciji

Proceedings of the 10th International Conference on Nuclear Option in Countries with Small and Medium Electricity Grids

Čavlina, Nikola ; Grgić, Davor ; Pevec, Dubravko

Zagreb: Hrvatsko nuklearno društvo

Podaci o skupu

10th International Conference on Nuclear Option in Countries with Small and Medium Electricity Grids

predavanje

01.06.2014-04.06.2014

Zadar, Hrvatska

Povezanost rada

Elektrotehnika