Determining residual stress in structure by method of local stress relief (CROSBI ID 481072)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Šimić, Vicko ; Herceg, Ljudevit ; Šimić, Diana
engleski
Determining residual stress in structure by method of local stress relief
Determining residual stress in structure by method of laocal stress relief is studied in paper.When determining residual stressin structure by means of the local stress relief method,it is necessary to make cuts on the surface of the structure around the measurement point where the deformation measuring device is placed. The theoretical and experimental research was conducted in the order to define the required ratio of the depth and spacing (H/L) of the cut.The theoretical research was performed using the finite-element method for the compressed model. The experimental research was conducted on a photoelastic model subjected to compression, with the cuts on one or both sides. Based on results obtained during the theoretical and experimental analyses, it may be assumed with a sufficient degree of precision that if H/L ratio is >0,5 then the stress is completely relieved from the studied part of the structure's surface.
residual stress; method of local stress relief; cut; finite-element method; photoelastic method
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
70-71-x.
1997.
objavljeno
Podaci o matičnoj publikaciji
14-th Simposium "Danubia Adria" on Experimental Method in Solid Mechanics
Jecić, Stjepan ; Alfirević, Ivo
Zagreb: Hrvatsko društvo za mehaniku (HDM)
Podaci o skupu
14-th Simposium "Danubia Adria" on Experimental Method in Solid Mechanics
poster
02.10.1997-04.10.1997
Poreč, Hrvatska