Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Quality control of the reference network of the tunnel Mala Kapela using the standards for expressing geospatial positional accuracy (CROSBI ID 609817)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Novaković, Gorana ; Marendić, Ante ; Orešković, Vedran Quality control of the reference network of the tunnel Mala Kapela using the standards for expressing geospatial positional accuracy // Proceedings of the 6th International Conference on Engineering Surveying - INGEO 2014 / Kopačik, Alojz ; Kyrinovič, Peter, Štroner, Martin (ur.). Prag: Czech technical university in Prague, 2014. str. 35-40

Podaci o odgovornosti

Novaković, Gorana ; Marendić, Ante ; Orešković, Vedran

engleski

Quality control of the reference network of the tunnel Mala Kapela using the standards for expressing geospatial positional accuracy

The positioning precision, as one of the most important component of geodetic control quality, has been expressed in various ways depending on the positioning method. The standards have referred to the precision of the observations, and not to the result, i.e. to the coordinates of geodetic control points. In accordance with the development of measuring technology, these standards have been changing as well. Mostly, the old standards have been using the expression dependant on the distance between geodetic control points. In this paper the new standards for reporting the precision of geodetic control positioning (horizontal and vertical), prescribing by international standards in the field of geospatial information (ISO 19113), that have been accepted as European, i.e. Croatian standards, will be presented. Current standards are related to the spatial position (coordinates) of geodetic control being independent of positioning methods or the survey instruments used. According to these standards, when reporting the precision of geodetic control positioning, two types of accuracy should be reported: Positional uncertainty (absolute) and Local uncertainty (relative), both for horizontal and vertical coordinates. In this paper, the application of current standards for reporting positioning precision is presented on the example of the surface reference geodetic control (only horizontal) of the tunnel “Mala Kapela”, located in the Republic of Croatia.

geodetic control; accuracy standards; ISO 19113

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

35-40.

2014.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 6th International Conference on Engineering Surveying - INGEO 2014

Kopačik, Alojz ; Kyrinovič, Peter, Štroner, Martin

Prag: Czech technical university in Prague

978-80-01-05469-7

Podaci o skupu

6th International Conference on Engineering Surveying - INGEO 2014

predavanje

03.04.2014-04.04.2014

Prag, Češka Republika

Povezanost rada

Geodezija