Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 691697

Influence of density to physical properties of heat treated beech wood floorings


Živković, Vjekoslav; Turkulin, Hrvoje; Galeković, Jakov
Influence of density to physical properties of heat treated beech wood floorings // The Seventh European Conference on Wood Modification / Nunes, Lina ; Jones, Dennis ; Hill, Callum ; Militz, Holger (ur.).
Lisbon: Laboratorio Nacional de Engeneria Civil, 2014. str. 114-117 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 691697 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Influence of density to physical properties of heat treated beech wood floorings

Autori
Živković, Vjekoslav ; Turkulin, Hrvoje ; Galeković, Jakov

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
The Seventh European Conference on Wood Modification / Nunes, Lina ; Jones, Dennis ; Hill, Callum ; Militz, Holger - Lisbon : Laboratorio Nacional de Engeneria Civil, 2014, 114-117

ISBN
978-972-49-2267-6

Skup
The Seventh European Conference on Wood Modification

Mjesto i datum
Lisabon, Portugal, 10-12.3.2014

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
beech; density; floorings; heat treatment

Sažetak
The aim of this work was to define the influence of density of beech wood of different densities to hygroscopic range, equilibrium moisture content (EMC) at ambient conditions, shrinking and swelling coefficients as well as to anti shrink efficiency. For the experimental purposes samples were prepared to form the following variables: wood species of different density, ring orientation (structure), and treatment level. For density tests beech wood samples were prepared from material of distinctively different density ranges marked as B1: (0, 612 – 0, 642 – 0, 666) g/cm3, and B2: (0, 705 – 0, 715 – 0, 734) g/cm3. Laboratory tests implied weight measurements, along with length and width measurements in three pre-defined positions on every sample. Separate panels of tangential and radial structure served for measurements of dimensional changes over their width. Shrinking coefficients of HTW were not reduced in comparison with native beech wood. However, the significant reduction in absolute water uptake resulted in significantly lower EMC values and improved ASE values of HTW. Heat treatment only slightly reduced the density, and the paper brings its influence to physical properties of wood floorings.

Izvorni jezik
Engleski

Znanstvena područja
Drvna tehnologija



POVEZANOST RADA


Projekti:
068-0682109-2096 - Oplemenjivanje i modifikacija površine drva (Jirouš-Rajković, Vlatka, MZOS ) ( POIROT)

Ustanove:
Šumarski fakultet, Zagreb

Profili:

Avatar Url Vjekoslav Živković (autor)

Avatar Url Hrvoje Turkulin (autor)

Citiraj ovu publikaciju

Živković, Vjekoslav; Turkulin, Hrvoje; Galeković, Jakov
Influence of density to physical properties of heat treated beech wood floorings // The Seventh European Conference on Wood Modification / Nunes, Lina ; Jones, Dennis ; Hill, Callum ; Militz, Holger (ur.).
Lisbon: Laboratorio Nacional de Engeneria Civil, 2014. str. 114-117 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Živković, V., Turkulin, H. & Galeković, J. (2014) Influence of density to physical properties of heat treated beech wood floorings. U: Nunes, L., Jones, D., Hill, C. & Militz, H. (ur.)The Seventh European Conference on Wood Modification.
@article{article, year = {2014}, pages = {114-117}, keywords = {beech, density, floorings, heat treatment}, isbn = {978-972-49-2267-6}, title = {Influence of density to physical properties of heat treated beech wood floorings}, keyword = {beech, density, floorings, heat treatment}, publisher = {Laboratorio Nacional de Engeneria Civil}, publisherplace = {Lisabon, Portugal} }




Contrast
Increase Font
Decrease Font
Dyslexic Font